High Resolution 12 Megapixels
The Flare 12M180-CX reaches up to 187 fps at a resolution of 4096 x 3072 pixels. At a resolution of 512 x 512 pixels up to 1,900 fps can be achieved. The integrated CMOS sensor CMV12000 with pipelined global shutter and correlated double sampling (CDS) provides for very high dynamics, high sensitivity with low noise levels and short exposure times. The high-speed camera is available as a S / W color and NIR version.
8 or 10 bit per pixel output (10 bit ADC). The camera can be operated in free run or external trigger mode.
In addition to F-mount a C-mount lens connection is possible. The power consumption of 9.5 W at 12V-24V input voltage is 12-Pin Hirose or via Power Over CoaXPress (PoCXP). Control is carried out as well on the CoaxPress interface.
Features
Applications
Sensor Type | CMOS w. Global Electronic Shutter (CMOSIS CMV12000) |
Sensor Size (H x V) | 4096 x 3072 (5.5ìm square pixels) |
Optical Format | Super 35mm / APS-C (28.1mm image circle at full resolution) |
Dynamic Range / Sensitivity | 60dB, 4.64 V/lux.s |
Frame Rate (Full Resolution) | 187 fps (8-bit), 149 fps (10-bit) |
Output Configurations | 1/2/4 channels at 3.125Gb/s (CXP-3) or 6.25Gb/s (CXP-6) |
Additional I/O (Hirose 12-pin) | TTL-level trigger input/output, EF-mount lens control interface |
Exposure Control | Programmable, edge-triggered, or auto-exposure control |
Image Correction | Black level, column and row FPN, bad pixel replacement |
Color Processing | Auto white balance (tracking or manual), programmable LUTs |
Camera Configuration | GenICam, or Flare Control software |
Lens Mount | M42 x 0.75 with F, EF and C-Mount adapters |
Dimensions (no lens adapter) | 91.7 x 91.7 x 44.5mm |
Dimensions (with F-mount) | 91.7 x 91.7 x 74.5mm |
Operating Temperature | -30° to 45°C |
Power Requirements | 12-24V DC or PoCXP, approx. 9.5W |
Weight | 490g (600g with F-mount) |